Respirator FFP2-NR

N95 Promask Advantages

Masks are always the prior choice to protect the health of the users due to their convenience and optimal protection ability. N95 Facemask is made by skin-friendly materials, especially with the ability of preventing dust, antibacterial and virus up to 95%.

Simple design, perfectly fit the users’ face shapes.

are designed with standard sizes, suitable for all size of users’ faces. The ear straps made of soft elastic material, bringing comfortable feelings even when being worn for a long time. The users can adjust the fit of the mask to suit his/her face to ensure the optimal prevention of harmful problems from the outside environment.

Standard design of 5 safety layers

Instruction for use:

+ Remove the respirator from the packaging and check the integrity of the respirator.

+ Grasp the respirator with the bendable edge at the top.

+ Hold the rubber bands in both hands and tighten the ears.

+ Grasp the bottom edge of the respirator and drag it over your mouth and chin.

Material: PPspunbond- filter layer-padded layer- filter layer -PP spunbond.

Storage: store respirators unopened at the temperature-20°C to 40°C and less than 80% of humidity. Always transport respirators in intact primary and secondary packaging.

Cleaning and disinfection: Cleaning with water or detergent reduces and impairs respirator function. The respirator can be disinfected after a short wear using UV radiation.

Maintenance: Check the integrity of the respirator package before use. Make sure that the parts of the respirator that come in contact with the wearer have no sharp edges or burrs. Always keep the respirator in clean packaging when not in use.

Minimum shelf life: 3 years from the date of manufacture stated on the packaging.


+ Please read the user information carefully before use.

+ The respirator is not intended for repeated use.

+ Protect respirators from damage and contamination by improper handling.

+ Replace the respirator with a new one as soon as it is wet, or after a maximum of 12 hours of continuous use.

+ After use, discard the respirator in a dedicated waste.

+ Respirators cannot be returned or replaced for hygienic reasons.

Authorized representative in European Union:

VIENMARK s.r.o., Za Tratí 192, 78813 Vikýřovice, Czech Republic.

Name of PPE: Filter half-mask PROMASK respirator type FFP2

Classification PPE: Filter half mask PROMASK, respirator type FFP2, PPE category III.

Intended use of personal protective equipment: Personal respiratory protective device for protection against particles, with an efficiency of at least 95%

Notified body: 1023- Institut pro testování a certifikaci a.s. Zlín, třída Tomáše Bati 299, Louky, 763 02 Zlín, Česká republika.

Used harmonized standards: ČSN EN ISO 149+A1:2009 (EN ISO 149:2001+A1:2009) 

Call Now!